HP 510 chip decoder

1. For use with HP 510 printer

2. After install the decoder, could use other ink, save more printing cost

3. Does not affect the printer’s warranty after install the decoder

Installation process:

1. Turn off the printer and pull out the plug

2. Remove the right side printer cover beside the cartridge

3. Pull out the J4 plug from printer and insert it into J4-510 location of e-card, then plug the P4-510 connection line to J4 socket of printer, and other socket not need to be pluged

4. Fix this electric card into the plastic frame

5. Install back the right side printer cover, turn on the printer

Note:

1. After using the decoder, electronic card totally control the electrocircuit, insert or unplug the cartridge, the printer will not react. When printing, please do not unplug the cartridges or refill the ink, it may damage the printer or the print head

2. Users have to check the ink volume within the ink cartridge in time, to avoid the ink is use up to damage the print head

3. If the printer has any problems, and need maintenance or repair, just remove this device