Epson 3800/3800C/3850 chip decoder
1. Production Model:OCD11
2. For use with Epson 3800/3800C/3850 printer
3. After install the decoder, could use other ink, and save more printing cost
4. After install the decoder, can print forever without reset chips
Product advantage:
1. Low cost: After install the decoder, the original cartridge could be used repeatedly, if use with the refillable ink cartridge, it will be more cost-effective and convenient, it can save more production cost and improve the competitiveness
2. High quality: Designjet decoder fundamentally decode the circuit of ink system, utilize chip to simulate cartridge data and decoder the data, can fully show all color ink volume
3. Finish installation, the chip can permanent use and not need to resetter the chip or change waste ink tank
Installation Process:
1. Epson 3800/3800C/3850 decoder ,insert 9 cartridge chip through the decoder slot, and weld the 3 contactors of the chips to the 3 contactors to the decoders, and 4 contactors of the chips to the 4 contactors to the decoders. And remove the chip from the waste ink tank, and weld it to the last slot
2. Remove the Epson 3800/3800C/3850 printer cover, pull out of the 9 digital cables, and insert to 9 slots of our chip decoder. And also insert the cable from the waste in tank to the slot
3. Turn on the printer and test, and all the cartridges are accepted, and ink volumes are always full
4. Turn off the printer, remove all the original ink cartridges, and pull out 9 tubings which connect to the print head, use the connector tool to connect with our eco-solvent ciss tubing, fill the corresponding color ink, turn on the printer and test.
5. All in good condition, turn off the printer. Fix our decoder, and make modification to the printer according to your own plan
Note:
1. EPSON 3800/3800C/3850 decoder must work with a set of original chips
2. After using the decoder, electronic card totally control the electrocircuit, insert or unplug the cartridge, the printer will not react. When printing, please do not unplug the cartridges or refill the ink, it may damage the printer or the print head
3. Do not put device with strong signals, like mobile phone, beside the decoders to avoid interference
4. After installing the compatible ink cartridge, do not repeated cleaning the printer, or will be appear error message and have to restart the printer